Clean and Inspect ( Each ) |
5.00 |
| R &
R on Press Fit Connecting Rod ( Each ) |
3.50 |
| R &
R on Full Float Connecting Rod ( OEM Clips Each ) |
2.50 |
| R &
R on Full Float Connecting Rod ( Spiral Locks Each ) |
7.50 |
| Fit
Wrist Pin To Wrist Pin Boss ( Each ) |
2.50 |
| Gas Port (Each ) | 15.00 |
| Fly Cut
(1) Valve Relief Per Piston ( With Existing Valve Relief ) |
8.50 |
| Fly Cut
(1) Valve Relief Per Piston ( Without Existing Valve Relief ) ( Need Sample Piston ) |
12.50 |
| Fly Cut
(2) Valve Relief Per Piston ( With Existing Valve Relief ) |
12.50 |
| Fly Cut
(2) Valve Relief Per Piston ( Without Existing Valve Relief ) ( Need Sample Piston ) |
15.00 |
| Machine
Wrist Pin Oiling Channel From Oil Ring Land To Wrist Pin Boss ( Per Piston ) |
7.50 |
| Deck Flat Top Piston ( Each ) | 5.00 |
| Deck Dome Piston Flat ( Each ) | 8.50 |
| Lower Piston Dome ( EACH ) | 7.50 |
| Balance Piston ( Each ) | 8.50 |
| Fit
Piston Dome To Combustion Chamber ( Per Hour Per Set ) |
55.00 |
| Lighten Piston ( Per Hour Per Set ) | 55.00 |