CYLINDER BLOCK
SERVICES

 

BORING ( OFF MAIN SADDLES )

Single / Twin Cylinder
( Air Cooled ) ( Per Cylinder )

 27.50
Grind Valves and Seats and
Inspect Valve Guides
( Air Cooled ) ( Per Cylinder )		 5.00
Install Valve Guides
( Air Cooled ) ( Each )		 12.50
Automotive / Lt. Truck
( Up To 4.360" Bore )
( Next Size ) ( Per Cylinder )		 7.50
Automotive / Lt. Truck
( Up To 4.360" Bore )
( Custom Up To +.060" )
( Per Cylinder )		 10.50
Automotive / Lt. Truck
( Up To 4.360" Bore )
( Custom Up To +.125" )
( Per Cylinder )		 17.50
Automotive / Lt. Truck
( Up To 4.360" Bore )
( Custom Up To +.250" )
( Per Cylinder )		 32.50
Sleeve Cylinder
( Does Not Include Sleeve )
( Per Cylinder )		 75.00

 

HONING ( SUNNEN CK-10 )

Clearance Honing After Boring
( Per Cylinder ) ( Cast Iron Rings )

 5.00
Clearance Honing After Boring
( Per Cylinder ) ( Moly Rings )		 7.50
With Torque Plates ( Per Cylinder ) 12.50
Performance Motor w/Torque Plates
( Per Cylinder )		 15.00

 

SURFACE DECK ( OFF MAIN SADDLES )

4 Cylinder ( Inline )
( Automotive / Lt. Truck )
( Up To .010" )

 55.00
4 Cylinder ( V Type )
( Automotive / Lt. Truck )
( Up To .010" )		 87.50
6 Cylinder ( Inline )
( Automotive / Lt. Truck )
( Up To .010" )		 65.00
6 Cylinder ( V Type )
( Automotive / Lt. Truck )
( Up To .010" )		 87.50
8 Cylinder ( Inline )
( Automotive / Lt. Truck )
( Up To .010" )		 95.00
8 Cylinder ( V Type )
( Automotive / Lt. Truck )
( Up To .010" )		 87.50
Set Deck Height With Customers
Crankshaft, Connecting Rods,
and Pistons ( Up To .035" )		 150.00

 

ALIGN HONING ( SUNNEN CH-100 )

Check Main Saddle Bores For
Size and Alignment

 10.00
Automotive and Lt. Truck
( Up To (5) Main Saddles )		 125.00
Automotive and Lt. Truck
( With (6) / (7) Main Saddles )		 150.00
400cid. Chev. Small Block
( Includes the Machining of the
Rear Main Bearing Seal Area )		 175.00
Automotive and Lt. Truck
( V8 Diesel )
( Up To (5) Main Saddles )		 175.00
Heavy Duty Gasoline / Diesel CALL
Extra Charge For Mix-Matched or
Missing Main Cap(s) ( Each )
( Does Not Include Parts )		 25.00

 

CAM BEARINGS ( INSTALLED )

Automotive and Lt. Truck ( Each )
( Does Not Include Parts )

 5.00
Heavy Duty and Industrial ( Each )
( Does Not Include Parts )		 7.50

 

WATER  /  OIL VAIN PLUGS ( INSTALLED )

Automotive and Lt. Truck
( Per Block )
( Does Not Include Parts )

 10.00

 

SPECIALTY OPERATIONS

Install Splade Caps ( Automotive )
( Set of 3 )

 375.00
Install Oil Restrictors
( Does Not Include Parts )		 20.00
Install Screen Kit
( Does Not Include Parts )		 25.00
Machine Cam Gear For Thrust Washer
( Does Not Include Parts )		 35.00
Sonic Check Cylinder Block 75.00
Grout Cylinder Block
( Includes Grout )		 125.00
O-Ring Cylinder Block 175.00
True Up Lifter Bores
( Includes Lifter Bore Sleeves )		 375.00
Machine Intake Manifold to
Cylinder Block Contact Surface
Areas ( Front and Rear ) 		45.00
Radius Connecting Rod and Main
Bearings ( Per Hour )		 55.00
Install Heli-Coil ( Each )
( Does Not Include Parts )		 12.50
Notch Cylinder Block For
Connecting Rod Clearance
( Per Hour )		 55.00
Race Prep Cylinder Block
( Deburring, Drilling, Tapping
Bolt Holes, Installing Plugs
and Restrictors )		 125.00
Machine Cylinder Block For
Use With A Dry Sump		 55.00
Back Cut Top Compression Rings
( Set of 8 )		 45.00
File Fit Piston Ring End Gaps
( Per Set )		 55.00
Degree-In Camshaft ( Does Not
Include Degree Button Set )		 55.00

 

CUSTOM ENGINE ASSEMBLY

Street Short Block Assembly

 175.00
Street Long Block Assembly 250.00
Street Complete Engine Assembly 325.00
Race Short Block Assembly 350.00
Race Long Block Assembly 450.00
Race Complete Engine Assembly 575.00